TRIPP LITE

Tripp Lite DisplayPort Over Cat6 Ethernet Extender, Transmitter/Receiver Kit, Up to 230 Feet / 70 Meters, 4K@60Hz Video, 4:4:4, Power Over Cable, TAA Compliant (B127A-1A1-BDBDA)

Returns / Exchanges: Sealed Product Only

SKU:037332288073

$414.10 CAD

~~$0.00 CAD~~ $414.10 CAD

Sale Sold out

Shipping calculated at checkout.

Product variants

Quantity

DisplayPort Extender for Digital Signage in Schools, Trade Shows and Lecture Halls

This complete transmitter and receiver system is recommended for video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings, hotels and other digital signage applications where the source and display are farther apart than conventional AV cables allow.

Extends a 4K AV Transmission up to 230 ft.

The B127A-1A1-BDBDA extends 4K signals from a DisplayPort source to a DisplayPort monitor up to 230 feet (70 meters) away via user-supplied Cat6 cabling. By adding a B127A-010-H HDMI repeater or B127A-110-BH transceiver (both sold separately) to the application, you can extend the signal up to 400 feet (122 meters) or 460 feet (140 meters), respectively.

Transmits Crystal-Clear 4K Video with Multi-Channel Audio and 4:4:4 Color

The B127A-1A1-BDBDA supports Ultra HD 4K resolutions up to 3840 x 2160 at 60 Hz with full, rich uncompressed DTS-HD, Dolby TrueHD and 7.1-channel digital audio. Built-in equalization allows you to fine-tune the image quality at the remote display. HDCP 2.2 encryption allows you to stream 4K content with no complications. This extender kit also supports uncompressed 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor.

Local HDMI Port on Transmitter Supports 4K @ 60 Hz Resolution

To monitor the video signal being extended to the receiver, connect a 4K display to the transmitter's local HDMI port with a user-supplied HDMI cable (such as P568- or P569-Series). This port does not support multi-resolution capabilities, so the connected monitor must also support 4K at 60 Hz to function properly.

Built-In PoC Technology Provides Power to Avoid Bulky External Power Bricks

Power over Cable (PoC) technology powers either the transmitter or receiver over Cat6 cable. Connect the included power supply at either end to power the entire installation. LEDs on both the transmitter and receiver light up to indicate the system is receiving power and a signal is being transmitted. PoC helps you avoid the hassle of a bulky power brick and gives you the freedom to place one end where needed without worrying about finding a nearby AC outlet.

DIP Switches Extend Your Choice of USB or IR

The DIP switches on both the transmitter and receiver can be adjusted to let you choose from the USB 1.1 or bi-directional IR functions. Choose to control the source device via keyboard and mouse or IR remote control from the display end of the installation. Only one function can be extended at a time.

Plug-and-Play Operation for Quick Setup and Immediate Use

The included transmitter and receiver work right out of the box with no software required. Mounting hardware is included for installing both units on a wall, pole or 19-inch rack. Connect the transmitter to the source and the receiver to the display with user-supplied DisplayPort cables (such as P580-Series). Then, connect the two units with user-supplied Cat6 Ethernet cable (such as N202-Series).

TAA-Compliant for GSA Schedule Purchases

The B127A-1A1-BDBDA is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

B127A-1A1-BDBDA

Shipping Policy

1. PO Box Address Policy:

We do not ship to PO Box addresses. Customers must provide a valid residential or commercial address during checkout.
If a PO Box address is provided, the order will be canceled, and we will not capture your pending payment.

2. Delivery Failure Due to Customer Fault:

If the delivery failure is attributed to customer-related factors, such as providing an incorrect shipping address or failure to receive the package, Dealtargets.com will not be held responsible for the unsuccessful delivery.
Customers are responsible for ensuring that the shipping information provided is accurate and for being available to receive the package during the designated delivery times.
Any additional costs incurred due to delivery failure caused by customer fault, including but not limited to redelivery fees, will be borne by the customer.

3. Adult Signature Requirement and Shipping Address Policy:

All shipments processed through Dealtargets.ca require an adult signature upon delivery. Customers must ensure that a person of legal age is available to sign for the package upon its arrival.
Once a parcel has been shipped, Dealtargets.ca does not entertain requests for changing the shipping address. Customers must provide accurate and up-to-date shipping information during checkout.
Any issues arising from failure to adhere to these policies, such as missed deliveries or address changes after shipment, will be the sole responsibility of the customer.

Return Policy for Non-Defective Items

Due to Manufacturer Requirements: We are unable to offer returns for opened, non-defective products. This policy adheres to manufacturer requirements, and no exceptions can be made.

Eligibility: To qualify for a return or exchange, the product must be in its factory-sealed condition or remain in its original shipping box.

Proof of Purchase: A proof of purchase, such as a receipt or order confirmation email, must accompany the returned product. For detailed information, refer to our Return and Refund Policy.

Manufacturer Warranty

Coverage: All items are covered by the manufacturer's warranty. Customers are required to contact the manufacturer directly for any warranty-related concerns. For more information, please visit our Product Warranty Policy.